Select Page

MOG RS485 1,2,4 pairs Armoured SHF2 MUD NEK606

Armoured, EMC screened, stranded conductor SHF2 MUD-Resistant NEK606, Fire Retardant IEC60332-3-22
RS51P24FxU, 29.03.2016/AP rev.0
Type Approval: 

 

 

 

image_pdfimage_print

    

 

Store at : -20 to +70 °C
Install at : -20 to +50 °CBend minimum : 15 times O.D.
Operate at : -40 to +70 °CBend minimum : 10 times O.D.
Pull maximum : 400N

 

 

Design

Conductor : stranded tinned copper 7×0.20mm AWG24 (0.60mm, 0.22mm2)
Insulation : polyethylene Ø1.30mm
Pair : 2 insulated conductors stranded together into a pair.
Assembling : 1, 2 or 4 pairs assembled together into a compact core
Colour code : 1.White/blue 2.White/orange 3. White/green 4.White/brown
Overall screen 1 : aluminium/polyester tape (coverage 100%) with stranded tinned copper drain wire 7×0.20mm.
Overall screen 2 : tinned copper braid (nominal coverage 85%)
Inner jacket : black Fire Retardant LSZH material
Armour : galvanized steel wires, tinned copper or bronze wires braid (nominal coverage >80%)
Outer jacket : black Fire Retardant LSZH material type SHF2 MUD-Resistant
Marking : APS Finland – ww/yy – ARMOURED RS485 MARINE CABLE … PAIRS 24AWG 100 OHM – SHF2 MUD IEC60332-3-22 Cat.A – lot + m

 

 

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Ozone resistant : IEC60811-2-1, DIN VDE 0472 part 805 B
Weather resistant : ASTM G 154, EN 11507
LSZH SHF2 : IEC 60092-360
Oil resistant : IEC60811, IRM 903
MUD resistant : NEK606:2009, IEC60092-350
Water absorption : IEC60811-1-3
UV resistant : IEC60811-2-1, ASTM-D-2565-92A
Cold bend & impact : CSA C22.2 (-40°C)

 

 

 

Ordering and delivery information

Pair countP/NO.D [mm]Weight [kg/km]Packaging
1 pairRS51P24FxU10.0140500 m (+/-5%)
2 pairsRS52P24FxU11.0185500 m (+/-5%)
4 pairs RS54P24FxU11.5205500 m (+/-5%)

 

 

Electrical characteristics

Operation voltage : 100V
Test voltage : 2000V d.c. for 1 minute
Resistance of the conductor @ 20°C : ≤ 90 Ω/km
Insulation resistance @ 20°C : ≥ 1GΩxkm
Nominal Capacitance @ 800Hz : 42 pF/m
Characteristic impedance : 120 ± 15 Ω @ 1MHz
Nominal attenuation : 22 dB/km @ 1MHz

 

 

 

Other standards of reference

IEC 60092-370 Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units. 
DNV TAP 827.50/2Type Approval Program
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
IEC 60811Insulating and sheathing materials of electric cables - Test method

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 

 

 

Reviews

There are no reviews yet.

Be the first to review “MOG RS485 1,2,4 pairs Armoured SHF2 MUD NEK606”

Your email address will not be published. Required fields are marked *

SKU: RS5_P24FxU Categories: , ,