Select Page

CCTV Composite cable Fire Retardant 4xFO, Power 3×2.5mm2, SHF2-MUD, Reinforced

4 FO, 4×2.5mmsq, MUD Resistant, NEK606, Reinforced by aramide braid, Armoured.
OC3254xxSKHooU Rev.00, Date 2017-07-07 

image_pdfimage_print
      

Standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360 Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units.
CEI EN 50289 Communication cables - Specifications for test methods
EN 50290-2-23 Insulation materials for telecommunication cables
IEC 60811 Insulating and sheathing materials of electric cables - Test method
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794General specifications for optical fibre cables

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +50 °C, bend minimum 20 times O.D.
Operate at : -40 to +90 °C, bend minimum : 20 times O.D.
Pull maximum : 5000N

 

Design

Fiber Optic, 4 cores
Fiber: 125/250μm SM or MM (see Fiber Characteristics datasheets)
Buffer: PBTP tube nominal diam 1.8mm filled with jelly
Colour code: 1.Natural  2.Red  3.Green  4.Yellow
Protection: Glass yarns (alternatively aramide yarns)
Jacket: LSZH Orange, nominal thickness 0.7mm, nominal outer Ø 4.0mm

Power 3 conductors 2.5mm²
Conductor :  stranded tinned copper 2.5mm2
Insulation :  XLPE, nominal Ø 3.5mm, colour coded (1.Blue, 2.Brown, 3.Green/Yellow)
Conductor resistance @ 20°C :  ≤ 8.21 Ω/km
insulation resistance @ 20°C :  ≥ 1GΩ x km
Test Voltage :  2000V AC x 1 minute
Operating Voltage :  300/500V 

Assembling
Cable core :  3 power conductors and 1 fiber element stranded together into a compact core
Screen :  tinned copper wire braid (coverage ≥80%)
Wrapping :  synthetic tape
Reinforcing :  double layer of aramide yarns
Inner jacket :  non-corrosive thermoplastic compound, LSZH, nom. Ø 13.0mm, black
Armour :  galvanised steel, tinned copper or bronze braid, coverage ≥85%
Outer jacket : non-corrosive thermoset compound LSZH SHF2-MUD, black colour
Marking (armoured version): 
APS Finland – ww/yy – ARMOURED REINFORCED COMPOSITE CABLE 4x… + 3×2.5mm2 – P/N – MUD NEK606  IEC60332-3-22 Cat.A – lot – CE + meter

 

Environmental properties and Fire Performances

Degree of acidity of gases :  IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10μS/mm)
Halogen acid gas :  IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission :  IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas :  EN50305 9.2
Flame retardant :  IEC 60332-1-2
Fire retardant :  IEC 60332-3-22 Cat.A
Ozone resistant :  IEC60811-2-1, DIN VDE 0472 part 805 B
LSZH SHF2 :  IEC 60092-360
Oil resistant :  IEC60811, IRM 903
MUD resistant :  NEK606:2009, IEC60092-360
Water absorption :  IEC60811-1-3
UV resistant :  IEC60811-2-1, ASTM-D-2565-92A
Cold bend & impact :  CSA C22.2

 

Ordering and delivery information

Cable typeP/NO.D [mm]Weight [kg/km]Packaging
Armoured GSWBOC3254xxKSHF2U19.8590500m/1640ft drum (+/-5%)
Armoured GSWAOC3254xxKSHFAU19.8590500m/1640ft drum (+/-5%)
Armoured BronzeOC3254xxKSHFBU19.8580500m/1640ft drum (+/-5%)
Armoured Tinned CopperOC3254xxKSHFTU19.8550500m/1640ft drum (+/-5%)

XX =  fiber type = OS2 = S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4.

 Engineered by APS Team

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

SKU: OC3254xxSKHooU Categories: , ,