Select Page

MOG Cat.7 S/FTP 4 pairs stranded conductor AWG23/7 SHF1

EMC screened, stranded conductor SHF1, Fire Retardant IEC60332-3-22 Cat.A
O7SF4P23F1, 23.03.2014/AP rev.3
Type Approval: DNV-GL E-13438

 

image_pdfimage_print

 

     

 

Store at: -40 to +70 °C
Install at: -40 to +70 °CBend minimum: 20 times O.D.
Operate at: -40 to +80 °CBend minimum: 15 times O.D.
Pull maximum: 100N
Cable weight: 80 kg/km

 

Design

Conductor : Stranded bare copper 7×0.22 AWG23 (0,28mm2)
Insulation : Cellular polyolefin Ø1.5mm
Pair : No 2 insulated conductors stranded together into a pair
Colour code : 1.White/blue 2.White/orange 3. White/green 4.White/brown
Screen 1 : Aluminium/polyester or Aluminium/polyester/aluminium tape over each single pair
Screen 2 : overall Tinned Copper Wire Braid

Outer jacket : Grey Fire Retardant and UV Resistant SHF1 material, LSZH (nominal thickness 1.0mm, Ø 8.6mm)
Marking : APS Finland – ww/yy – SFTP Flex 4x2x23AWG Cat.7 SHF1 – DNV – IEC60332-3-22 Cat A – TK/lot + m

 

 

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Smoke emission (Transmittance) ≥ 60%)
Toxicity of evolved gas : YES – NES 713, CEI 20-37/7
Flame retardant : YES – IEC 60332-1-2,
Fire retardant : YES – IEC 60332-3-22 Cat.A
Fire resistant : NO
Ozone resistant : available upon request –
Weather resistant : available upon request
LSZH SHF2 : available upon request –
Oil resistant : available upon request
MUD resistant : available upon request –
Water resistant : available upon request
Water penetration : NO
UV resistant : YES – ASTM-D-2565-92A

 

 

Ordering and delivery information

Pair countP/NO.D [mm]Weight [kg/km]Packaging
4 pairsO7SF4P23F18.690500 m (+/-5%)

 

 

Electrical characteristics (IEC 60811, EN 50288-4-2)

Test voltage : 1kV d.c. or 0.7kV a.c. for 1 minute
Resistance of the conductor @ 20°C : ≤ 69,5 /km
Insulation resistance : ≥ 500 MΩxkm (100V-500V)
Nominal Capacitance @ 800÷1000MHz : 55 pF/m
Average characteristic impedance : 100 ± 5 Ω @ 100MHz
Transfer impedance : ≤15mΩ/m @ 1MHz, – ≤10mΩ/m @ 10MHz – ≤30mΩ/m @ 30MHz

Frequency (MHz) :1410162032.562.5100155200300600
Attenuation dB/100m (typical)2.23.85.97.48.410.515.318.123.226.633.350.1
NEXT dB (typical)10010095909090858280777167
PS NEXT dB (typical)959590868080807570686662
ELFEXT dB (typical)969390100100100100100100100100
PS ELFEXT dB (typical)9890981059090909090909090
Return Loss dB (typical)353138323231273428252321

Other standards of reference

IEC 60092-370 Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units. 
DNV TAP 827.50/2Type Approval Program
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
CEI EN 50288-1Multi-element metallic used in analogue and digital communication and control : Generic Specification
CEI EN 50288-2-1Setional specification for screened cables characterised up to 100MHz
CEI EN 50288-5-1Setional specification for screened cables characterised up to 250MHz
CEI EN 50288-4-2Setional speci cation for screened cables characterised up to 600MHz
CEI EN 50289 seriesCommunication cables - Specifications for test methods
IEC 60811Insulating and sheathing materials of electric cables - Test method
Standards EIA/TIA 568-C.2, ISO/IEC 11801, UL444, UL1581, UL1666
Applications 100Base-TX, 100Base-T, 100VG-AnyLAN, 1000Base-TX, ATM

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

Reviews

There are no reviews yet.

Be the first to review “MOG Cat.7 S/FTP 4 pairs stranded conductor AWG23/7 SHF1”

Your email address will not be published. Required fields are marked *

SKU: O7SF4P23F1 Categories: , ,