Select Page

BOXA1 fiber optic cable breakout armoured SHF1 Fire Resistant

Up to 48 cores, armoured SHF1, Fire Resistant IEC60331-25, Fire Retardant IEC60332-3-22
OBOXA1_1, 10.09.2014/AP rev.0

 

 

image_pdfimage_print

   

 

 

Store at: -40 to +70 °C
Install at: -10 to +50 °CBend minimum : 20 times O.D.
Operate at : -40 to +70 °CBend minimum : 15 times O.D.
Crush maximum : 2000N/100mm
Impact maximum : 20J

 

 

Design

Bare fiber : 250µm
Buffer : 900µm tight buffer
Colour code : white
Protection : aramide yarns
Inner sheath : Blue SHF1 material, nominal diameter 2.0mm, each numbered for identification (1 to 48)
Cable core : up to 48 single sheathed fibers are assembled together (around a central member if needed) and wrapped by a fire protection tape.
Overall protection : glass yarns
Intermediate jacket : Blue SHF1 UV-Resistant material, nominal thickness 1.0mm
Armour : galvanized steel wire braid, coverage ≥80%
Outer jacket : Blue SHF1 UV-Resistant material, nominal thickness 1.2mm
Marking : APS Finland ww/mm – ARMOURED Fiber Optic Cable BREAKOUT “fiber count / type” + “P/N” – SHF1 IEC60331-25 IEC60332-3-22 Cat A – lot + meter

 

 

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : IEC 60331-25
Oil resistant : intermittent splash – permanent resistance available upon request
Water absorption : IEC60502
Water penetration : NO
UV resistant : IEC60811-2-1, ASTM-D-2565-92A

 

Features

Fiber countSimplex outer diameter (mm)Intermediate jacket diameter (mm)Outer jacket thickness (mm)Cable Outer Diameter (mm)Cable weight (kg/km)Pulling tension (N)
22,07,51,210,01201000
42,08,51,211,01802000
82,09,01,212,02302000
122,010,01,212,53602000
242,012,41,214,94502500
362,016,41,220,06702000
482,022,01,226,07742500

Ordering and delivery information

Fiber countSMOM1OM1+OM2OM3OM4Packaging
2OBOXA102S21OBOXA102M11OBOXA102MP1OBOXA102M21OBOXA102M31OBOXA102M412000m (+/-5%)
4OBOXA104S21OBOXA104M11OBOXA104MP1OBOXA104M21OBOXA104M31OBOXA104M412000m (+/-5%)
8OBOXA108S21OBOXA108M11OBOXA108MP1OBOXA108M21OBOXA108M31OBOXA108M412000m (+/-5%)
12OBOXA112S21OBOXA112M11OBOXA112MP1OBOXA112M21OBOXA112M31OBOXA112M412000m (+/-5%)
24OBOXA124S21OBOXA124M11OBOXA124MP1OBOXA124M21OBOXA124M31OBOXA124M412000m (+/-5%)
36OBOXA136S21OBOXA136M11OBOXA136MP1OBOXA136M21OBOXA136M31OBOXA136M412000m (+/-5%)
48OBOXA148S21OBOXA148M11OBOXA148MP1OBOXA148M21OBOXA148M31OBOXA148M412000m (+/-5%)

 

 

Other standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
DNV TAP 827.50/1Type Approval Program - Optical Fibre Cables
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794general specifications for optical fibres cables

 

 

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

Reviews

There are no reviews yet.

Be the first to review “BOXA1 fiber optic cable breakout armoured SHF1 Fire Resistant”

Your email address will not be published. Required fields are marked *

SKU: OBOXA1_1 Categories: , ,