Select Page

BOA1 fiber optic cable breakout armoured SHF1

up to 24 cores, armoured SHF1, Fire Retardant IEC60332-3-22
OBOA1_1, 13.08.2014/AP rev.0






Store at: -40 to +70 °C
Install at: -10 to +50 °CBend minimum: 15 times O.D.
Operate at: -40 to +70 °CBend minimum:10 times O.D.
Crush maximum: 2000N/100mm
Impact maximum: 20J




Bare fiber : 250µm
Buffer : 900µm tight buffer
Colour code : white
Protection : aramide yarns
Inner sheath : blue SHF1 material, nominal diameter 2.0mm, each numbered for identification
Cable core : up to 24 tight buffered fibers are stranded together around a central member and wrapped by a synthetic tape.
Intermediate jacket : blue SHF1 UV-Resistant material, nominal thickness 1.0mm
Armour : galvanized steel wire braid, coverage ≥85% (tinned copper or bronze braid available upon request)
Outer jacket : blue SHF1 UV-Resistant material, nominal thickness 1.2mm
Marking : APS Finland ww/mm – Fiber Optic Cable BREAKOUT BOA1 “fiber count / type” – ARMOURED SHF1 IEC60332-3-22 Cat A – lot + meter



Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : NO
Oil resistant : intermittent splash – permanent resistance available upon request
UV resistant : IEC60811-2-1, ASTM-D-2565-92A




Fiber countSimplex outer diameter (mm)Intermediate jacket diameter (mm)Outer jacket thickness (mm)Cable Outer Diameter (mm)Cable weight (kg/km)Pulling tension (N)



Ordering and delivery information

Fiber countSMOM1OM2OM3OM4Packaging
2OBO102S21OBO102M11OBO102M21OBO102M31OBO102M41drum 2000m (+/-5%)
4OBO104S21OBO104M11OBO104M21OBO104M31OBO104M41drum 2000m (+/-5%)
8OBO108S21OBO108M11OBO108M21OBO108M31OBO108M41drum 2000m (+/-5%)
12OBO112S21OBO112M11OBO112M21OBO112M31OBO112M41drum 2000m (+/-5%)
24OBO124S21OBO124M11OBO124M21OBO124M31OBO124M41drum 2000m (+/-5%)




Other standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
DNV TAP 827.50/1Type Approval Program - Optical Fibre Cables
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794general specifications for optical fibres cables









Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.



There are no reviews yet.

Be the first to review “BOA1 fiber optic cable breakout armoured SHF1”

Your email address will not be published. Required fields are marked *