Select Page

Arctic Grade CAN Bus cable 1&2 pairs 0.75mm SHF2

EMC screened, stranded conductor -65°C, SHF2, Fire Retardant IEC60332-3-22
OCBA1P075F2/OCBA2P075F2, 01.03.2015/AP rev.0

 

image_pdfimage_print

    

 

 

Store at : -20 to +70 °C
Install at : -20 to +70 °CBend minimum : 20 times O.D.
Operate at : -65 to +80 °CBend minimum : 20 times O.D.
Pull maximum : 50N

Design

Conductor : Stranded bare copper 24×0.20 (0.75mm2)
Insulation : Cellular polyolefin Ø2.95mm
Pair : No 2 insulated conductors stranded together into a pair
Colour code : 1.White/blue
Screen on pair : Aluminium/polyester tape (100%)
Grounding wire : Tinned copper 24×0.20 (0.75mm2) polyolefin insulated (nominal Ø2.40mm). Colour yellow/green.
Assembling : One screened pair with one grounding wire with fillers, wrapped with fire barrier tape
Overall screen : tinned copper braid (coverage ≥80%)
Outer jacket : black Fire Retardant and UV Resistant SHF2 material, LSZH (Ø 12.0mm)
Marking : APS Finland – ww/yy – ARCTIC GRADE CAN BUS Marine 1x2x0.75 +0.75mm SHF2 – IEC60332-3-22 Cat A – TK/lot + meter

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Ozone resistant : IEC 60811-2-1
LSZH SHF2 : IEC 60092-360
Oil resistant : IEC 60811, IRM 903
MUD resistant : upon request
Water absorption : IEC60811-1-3
UV resistant : IEC60811-2-1, ASTM-D-2565-92A
Cold Bend : CSA C22.2 (-65°C)
Cold Impact : CSA C22.2 (-55°C)

 

Electrical characteristics (IEC60092-350, IEC61784, IEC61158)

Operation voltage : 100V
Test voltage : 1kV d.c. for 1 minute
Resistance of the conductor @ 20°C : ≤ 26.0 Ω/km for bare copper / ≤ 26.7 Ω/km for bare coppe
Insulation resistance @ 20°C : ≥ 1GΩxkm (BUS conductor) / ≥ 10MΩxkm (earth conductor)
Nominal Capacitance @ 800Hz : 40 pF/m
Average characteristic impedance : 120 ± 10% @ 1MHz
Nominal attenuation : 13.2 dB/km @ 1MHz

 

 

Ordering and delivery information

  Pair count P/N O.D [mm] Weight [kg/km] Packaging 
1 pair OCBA1P075F2 12.0 225 drum 500m (+/-5%) 
2 pairs OCBA2P075F2 12.0 255 drum 500m (+/-5%) 

 

 

Other standards of reference

IEC 60092-370 Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units. 
DNV TAP 827.50/2Type Approval Program
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
IEC 60811Insulating and sheathing materials of electric cables - Test method
 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed.

Reviews

There are no reviews yet.

Be the first to review “Arctic Grade CAN Bus cable 1&2 pairs 0.75mm SHF2”

Your email address will not be published. Required fields are marked *