Select Page

AIAI up to 24 fibers, tight buffered, armoured dielectric, SHF1, Fire Retardant IEC60332-3-22 Cat.A

Up to 24 cores, dielectric armoured SHF1, Fire Retardant IEC60332-3-22
OAIAI_1, 15.05.2014/AP rev.1
Type Approval: DNV-GL TAE00000UF

 

image_pdfimage_print

    

 

 

Store at : -40 to +70 °C
Install at : -10 to +50 °CBend minimum : 15 times : O.D.
Operate at : -30 to +70 °CBend minimum : 10 times O.D.
Crush maximum : 2000N/100mm
Impact maximum : 25J

Design

Bare fiber : 250µm
Buffer : 900µm tight buffer
Colour code : See table
Cable core : up to 24 tight buffered fibers are stranded together. The core is filled with waterblocking glass yarns.
Inner sheath : black SHF1 material
Armour : antirodent glass yarns. Coverage ≥80%.
Outer jacket : black SHF1 UV-Resistant material, LSZH
Marking : APS Finland ww/mm – Fiber Optic Cable AIAI “fiber count and type” – SHF1 IEC60332-3-22 Cat A – TK/lot + meter

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : NO
Ozone resistant : upon request
Weather resistant : upon request
LSZH SHF2 : upon request
Oil resistant : intermittent splash – permanent resistance available upon request
MUD resistant : upon request
Water absorption : IEC60502
Water penetration : IEC 60794-1-2-F5-B (inner core only)
UV resistant : IEC60811-2-1, ASTM-D-2565-92A

 

 

Ordering and delivery information

Fiber countSMOM1OM2OM3OM4Packaging
2OAIAI02S21OAIAI02M11OAIAI02M21OAIAI02M31OAIAI02M41drum 2000m (+/-5%)
4OAIAI04S21OAIAI04M11OAIAI04M21OAIAI04M31OAIAI04M41drum 2000m (+/-5%)
8OAIAI08S21OAIAI08M11OAIAI08M21OAIAI08M31OAIAI08M41drum 2000m (+/-5%)
12OAIAI12S21OAIAI12M11OAIAI12M21OAIAI12M31OAIAI12M41drum 2000m (+/-5%)
24OAIAI24S21OAIAI24M11OAIAI24M21OAIAI24M31OAIAI24M41drum 2000m (+/-5%)

 

 

Colour code of fibers

Tube2 fibers4 fibers8 fibers12 fibers24 fibers48 fibers
1Red (2 fibers)Red (2 fibers)Red (4 fibers)Red (4 fibers)Red (6 fibers)Red (12 fibers)
2FillerGreen (2 fibers)Green (4 fibers)Green (4 fibers)Green (6 fibers)Green (12 fibers)
3FillerFillerFillerNatural (4 fibers)Natural (6 fibers)Natural (12 fibers)
4FillerFillerFillerFillerNatural (6 fibers)Natural (12 fibers)
5FillerFillerFillerFillerFillerFiller
6FillerFillerFillerFillerFillerFiller

 

 

Features

Fiber countInner jacket thickness (mm)Inner jacket diameter (mm)Outer jacket thickness (mm)Cable Diameter (mm)Cable weight (kg/km)Pulling tension (N)
21.04.81.08.0951000
41.05.21.08.51051000
81.06.01.09.41251000
121.26.71.310.31451500
241.28.51.312.11852000

 

 

 

Other standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
DNV TAP 827.50/1Type Approval Program - Optical Fibre Cables
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794general specifications for optical fibres cables

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 

Reviews

There are no reviews yet.

Be the first to review “AIAI up to 24 fibers, tight buffered, armoured dielectric, SHF1, Fire Retardant IEC60332-3-22 Cat.A”

Your email address will not be published. Required fields are marked *