Multi Mode Optical Fiber Specification

  

 

Multi Mode Fibres OM1 MM62.5 OM1 + MM62,5 OM2 MM50 OM3 MM50 OM4 MM50 OM5 MM50
Applicable standards IEC60793-2-10 Type A1b IEC60793-2-10 Type A1b IEC60793-2-10 Type A1a.1 ISO/IEC 11801 ISO/IEC 11801 IEC60793-2-10 Type A1a.3 ISO/IEC 11801-OM5 IEC60793-2-10 Type A1a.4
Telcordia GR20-CORE Telcordia GR20-CORE Telcordia GR20-CORE IEC60793-2-10 Type A1a.2 Telcordia GR20-CORE Telcordia GR 20-CORE/409-CORE
ITU-T G651.1, Am.1 ITU-T G651.1, Am.1 ITU-T G651.1, Am.1 TIA/EIA-492AAAE
Core Diameter 62,5 ± 2 µm 62,5 ± 2.5 µm 50 ± 2 µm 50 ± 2 µm                          50 ± 2 µm 50 ± 2.5 µm
Core non-circularity ≤ 5 % ≤ 5 % ≤ 5 % ≤ 5 % ≤ 5 % ≤ 5 %
Cladding diameter 125 ± 1,0 µm 125  ± 1,0 µm 125  ± 1,0 µm 125  ± 1,0 µm 125  ± 1,0 µm 125  ± 1,0 µm
Coating diameter 242 ± 5 µm 242 ± 7 µm 242 ± 5 µm  242 ± 5 µm  242 ± 5 µm  242 ± 5 µm 
Cladding non-circularity ≤ 0,7 % ≤ 1,0 % ≤ 0,7 % ≤ 0,7 % ≤ 0,7 % ≤ 1,0 %
Core/Cladding concentricity error ≤ 1,0 µm ≤ 1,0 µm ≤ 1,0 µm    ≤ 1,0 µm    ≤ 1,0 µm    ≤ 1,5 µm   
Coating/Cladding concentricity error ≤ 10 µm ≤ 12 µm ≤ 6 µm ≤ 6 µm ≤ 6 µm ≤ 10 µm
Numerical aperture 0,275 ± 0,015 µm 0,275 ± 0,015 µm 0,200 ± 0,015 µm 0,200 ± 0,015 µm 0,200 ± 0,015 µm 0,200 ± 0,015 µm
Attenuation @ 850 nm ≤ 3,50 dB/km ≤ 2.80 dB/km ≤ 2,80 dB/km ≤ 2,80 dB/km ≤ 2,60 dB/km ≤ 2,40 dB/km
Attenuation @ 1300 nm ≤ 1,00 dB/km ≤ 0,70 dB/km ≤ 0,80 dB/km  ≤ 0,80 dB/km  ≤ 0,60 dB/km  ≤ 0,60 dB/km 
Bandwith @ 850 nm ≥ 200 MHz*km ≥ 250 MHz*km ≥ 500 MHz*km ≥ 1500 MHz*km ≥ 3500 MHz*km ≥ 3500 MHz*km
Bandwith @ 1300 nm ≥ 500 MHz*km ≥ 1000 MHz*km ≥ 500 MHz*km ≥ 500 MHz*km ≥ 500 MHz*km ≥ 500 MHz*km
Proof test ≥ 100 kpsi ≥ 100 kpsi ≥ 100 kpsi ≥ 100 kpsi ≥ 100 kpsi ≥ 100 kpsi
Link lenghts
100BASE FX 2000m 2000m 2000m 2000m 2000m 2000m
1000BASE SX 275m 500m 550m 1000m 1100m 1100m
1000BASE LX 550m 1000m 550m 550m 550m 550m
10GBASE SW/SR 565m 33m 82m 300m 550m 550m
10GBASE LX4 300m 300m 300m 300m
40GBASE SR4 100m 150m 150m
100GBASE SR10 100m 150m 100m

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 

 


Single Mode Optical Fiber Specification

  

 

Single Mode Fibres OS2 OS2 OS2 OS2 NZD
Applicable standards ITU G652.D ITU G657.A IEC60793-2-50 Type B.1.3 / B.6.A ITU G657.B ITU G655.E / G656 IEC60793-2-50 Type B.4 / B5
IEC60793-2-50 Type B.1.3 Telcordia GR20-CORE IEC60793-2-50 Type B.1.3 / B.6.A&B
Telcordia GR20-CORE
Mode Field Diameter @ 1310nm 9,0 ± 0,4 µm 9,0 ± 0,4 µm 8,9 ± 0,4 µm
Mode Field Diameter @ 1550nm 10,1 ± 0,5 µm 10,1 ± 0,5 µm 9,9 ± 0,5 µm 9,2 ± 0,5 µm
Cladding diameter 125 ± 0,7 µm 125 ± 0,7 µm 125 ± 0,7 µm 125 ± 1,0 µm
Coating diameter 242 ± 7 µm 242 ± 7 µm 242 ± 7 µm 242 ± 7 µm
Cladding non-circularity ≤ 0,7 % ≤ 0,7 % ≤ 0,7 % ≤ 1,7 %
Core/Cladding concentricity error ≤ 0,5 µm ≤ 0,5 µm ≤ 0,5 µm ≤ 0,6 µm
Coating/Cladding concentricity error ≤ 12 µm ≤ 12 µm ≤ 12 µm ≤ 12 µm
Cable Cut off wavelength ≤ 1260 µm ≤ 1260 µm ≤ 1260 µm ≤ 1300 µm
Zero dispersion wavelength (λ0) 1300 ÷1322 µm 1300 ÷1322 µm 1300 ÷1324 µm ≤ 1440 µm
Dispersion slope (S0) @ (λ0) ≤ 0,090 ps/(nm2 * km) ≤ 0,090 ps/(nm2 * km) ≤ 0,092 ps/(nm2 * km)
Chromatic dispersion @ 1285—1330 nm ≤ 3,5 ps/(nm * km) ≤ 3,5 ps/(nm * km)
Chromatic dispersion @ 1550 ≤ 18 ps/(nm * km) ≤ 18 ps/(nm * km)
Chromatic dispersion @ 1625 ≤ 22 ps/(nm * km) ≤ 22 ps/(nm * km)
Chromatic dispersion @ 1530—1565 5,5 ÷ 10 ps/(nm * km)
Chromatic dispersion @ 1565—1625 7,5 ÷ 13,8 ps/(nm * km)
PMD @ 1550 nm ≤ 0,1 ps/√km ≤ 0,1 ps/√km ≤ 0,1 ps/√km ≤ 0,2 ps/√km
Attenuation @ 1310 nm ≤ 0,35 dB/km ≤ 0,35 dB/km ≤ 0,35 dB/km ≤ 0,40 dB/km
Attenuation @ 1383 nm ≤ 0,35 dB/km ≤ 0,35 dB/km ≤ 0,35 dB/km ≤ 1,00 dB/km
Attenuation @ 1550 nm ≤ 0,25 dB/km ≤ 0,25 dB/km ≤ 0,25 dB/km ≤ 0,25 dB/km
Attenuation @ 1625 nm ≤ 0,28 dB/km ≤ 0,28 dB/km ≤ 0,28 dB/km ≤ 0,28 dB/km
Attenuation with bending
Mandrel radius 15mmm @ 1550 10 turns ≤ 0,25 dB ≤ 0,03 dB
Mandrel radius 15mmm @ 1625 10 turns ≤ 1,0 dB ≤ 0,1 dB
Mandrel radius 10mmm @ 1550 1 turn ≤ 0,75 dB ≤ 0,1 dB
Mandrel radius 10mmm @ 1625 1 turn ≤ 1,50 dB ≤ 0,2 dB
Mandrel radius 7,5mmm @ 1550 1 turn ≤ 0,5 dB
Mandrel radius 7,5mmm @ 1625 1 turn ≤ 1,0 dB
Proof test ≥ 100 kpsi ≥ 100 kpsi ≥ 100 kpsi ≥ 100 kpsi
Link lenghts
1000BASE LX 5 000m 5 000m 5 000m 5 000m
10GBASE L 10 000m 10 000m 10 000m
10GBASE EW/ER 30 000m 40 000m 40 000m
40GBASE LR4 10 000m 10 000m 10 000m
100GBASE ER4 10 000m 10 000m 10 000m

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 

 
AP Solutions Oy – www.aps-finland.fi – info@apsolutions.fi