Patch panel, 24 ports RJ45, unloaded

Standards of reference and applications

EIA19″

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -20 to +60 °C
Fitting : designed for unshielded and shielded LAN 1 unit EIA 19″ rack mount.

 

Design

Material : black powder painted steel (front), galvanised steel (rear).
Features : built-in cable holder rack with cable shield termination.
Printing :   Numbered 1-24
Size :  18.4 x 38.4 x 25.7 mm, 1 Unit

 

Ordering and delivery information

Ports P/N Size [mm] Weight [kg/km] Packaging
24 PPE24SU 18.4H x 38.4W x 25.7D 1.0 1 pc/box

 

Recommended connectivity

Keystone jack : all APS Keystone Jacks Category 5e, 6, 6A.
Patchcords : PCMJ6U_, PCMJ6F_, PCMJ6S_.

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCS6U Cat.6 cable U/UTP 4 pairs AWG23/1 LSZH Indoor

   

Standards of reference and applications

EIA/TIA 568-C.5, ISO/IEC 11801, EN 50288-6-1
Ethernet 10 BASE-T, 100 BASE-T, 100 BASE-TX, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -10 to +60 °C
Bend minimum : 10 times O.D.
Bend minimum : 10 times O.D.
Pull maximum : 40N

 

Design

Conductor : solid bare copper AWG23 (0.55mm)
Insulation : polyethylene 0.98 ± 0.01 mm
Pair : 2 insulated conductors stranded together
Colour code : 1.White/blue  2.White/orange  3. White/green  4.White/brown
Assembling : no 4 pairs assembled together around a PE central cross
Screen : N/A
Outer jacket : grey LSZH material
Marking : APS Finland – ww/yy – U/UTP 4x2x23AWG Category 6 LSZH – Extended Frequency 250MHz 100Ohm – ISO/IEC 11801 – /lot + meter

 

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2
Halogen acid gas :
IEC 60754-1, IEC 60754-2
Smoke Emission :
IEC 61034-2, EN 50268-2
Toxicity of evolved gas :
EN 50305 9.2
Flame retardant :
 EN 60332-1-2

CPR Class (CE) : Class Dca

 

Electrical characteristics

Resistance of the conductor @ 20°C : ≤ 90 Ω/km
Mutual Capacitance : 52 pF/m (cond/cond)
Capacitance unbalance : 1500 pF/km (p/p @ 1KHz)
Average characteristic impedance : 100 ± 15 Ω @ 100MHz
Velocity of propagation (NVP) : 66%

Frequency (MHz) : 1 4 10 16 20 31,5 62,5 100 155 200 250
Attenuation (dB/100m) 2.0 3.8 6.0 7.6 8.5 10.8 15.5 19.9 24.70 29.1 33
NEXT (dB) 74.3 65.3 59.3 56.2 54.8 51.9 47.4 44.3 41.7 39.8 38.3
PS-NEXT (dB) 72.3 63.3 57.3 54.2 52.8 49.9 45.4 42.3 39.7 37.8 36.3
ELFEXT (dB) 67.8 55.8 47.8 45.9 41.8 42.0 42.0 27.8 24.3 21.8 20.4
PS-ELFEXT (dB) 64.8 52.8 44.8 43.0 38.8 35.0 29.1 25.0 21.3 19.0 17.0
Return Loss 20 23.0 25.0 25.0 25.0 21.5 21.5 20.1 18.9 18.0 17.3

Ordering and delivery information

Pair count P/N O.D [mm] Weight [kg/km] Packaging
4 pairs W5UX042M0S30 6.5 36.8 305m / 1000ft box

 

Recommended connectivity

Keystone jack : MJ6UK / MJ6UC
RJ45 plug : RJ45U6PL241 / RJ45U6BL241
Panel : PPE24SU
Patchcords : PCMJ6U_


SCS6U Cat.6 cable U/UTP 4 pairs AWG24/1 PE Outdoor

 

Standards of reference and applications

EIA/TIA 568-C.5, ISO/IEC 11801, EN 50288-6-1
Ethernet 10 BASE-T, 100 BASE-T, 100 BASE-TX, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -10 to +60 °C
Bend minimum : 10 times O.D.
Bend minimum : 10 times O.D.
Pull maximum : 40N

 

Design

Conductor : solid bare copper AWG23 (0.55mm)
Insulation : polyethylene 0.98 ± 0.01 mm
Pair : 2 insulated conductors stranded together
Colour code : 1.White/blue  2.White/orange  3. White/green  4.White/brown
Assembling : no 4 pairs assembled together around a PE central cross
Screen : N/A
Outer jacket : black PE material
Marking : APS Finland – ww/yy – U/UTP 4x2x23AWG Category 6 PE Outdoor – Extended Frequency 250MHz 100Ohm – ISO/IEC 11801 – /lot + meter

 

Environmental properties and Fire Performances

UV Resistant : UL 1581

 

Electrical characteristics

Resistance of the conductor @ 20°C : ≤ 90 Ω/km
Mutual Capacitance : 52 pF/m (cond/cond)
Capacitance unbalance : 1500 pF/km (p/p @ 1KHz)
Average characteristic impedance : 100 ± 15 Ω @ 100MHz
Velocity of propagation (NVP) : 66%

Frequency (MHz) : 1 4 10 16 20 31,5 62,5 100 155 200 250
Attenuation (dB/100m) 2.0 3.8 6.0 7.6 8.5 10.8 15.5 19.9 24.70 29.1 33
NEXT (dB) 74.3 65.3 59.3 56.2 54.8 51.9 47.4 44.3 41.7 39.8 38.3
PS-NEXT (dB) 72.3 63.3 57.3 54.2 52.8 49.9 45.4 42.3 39.7 37.8 36.3
ELFEXT (dB) 67.8 55.8 47.8 45.9 41.8 42.0 42.0 27.8 24.3 21.8 20.4
PS-ELFEXT (dB) 64.8 52.8 44.8 43.0 38.8 35.0 29.1 25.0 21.3 19.0 17.0
Return Loss 20 23.0 25.0 25.0 25.0 21.5 21.5 20.1 18.9 18.0 17.3

Ordering and delivery information

Pair count P/N O.D [mm] Weight [kg/km] Packaging
4 pairs W5UX042E0S30 6,5 38 305m/1000ft box
4 pairs W5UX042E0B50 6,5 38 500m/1640ft drum

 

Recommended connectivity

Keystone jack : MJ6UK / MJ6UC
RJ45 plug : RJ45U6PL241 / RJ45U6BL241
Panel : PPE24SU
Patchcords : PCMJ6U_


SCS6U Cat.6 cable U/UTP 4 pairs AWG24/1 PVC Indoor

 

Standards of reference and applications

EIA/TIA 568-C.5, ISO/IEC 11801, EN 50288-6-1
Ethernet 10 BASE-T, 100 BASE-T, 100 BASE-TX, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -10 to +60 °C
Bend minimum : 10 times O.D.
Bend minimum : 10 times O.D.
Pull maximum : 40N

 

Design

Conductor : solid bare copper AWG23 (0.55mm)
Insulation : polyethylene 0.98 ± 0.01 mm
Pair : 2 insulated conductors stranded together
Colour code : 1.White/blue  2.White/orange  3. White/green  4.White/brown
Assembling : no 4 pairs assembled together around a PE central cross
Screen : N/A
Outer jacket : grey PVC material
Marking : APS Finland – ww/yy – U/UTP 4x2x23AWG Category 6 PVC – Extended Frequency 250MHz 100Ohm – ISO/IEC 11801 – /lot + meter

 

Environmental properties and Fire Performances

Flame retardant : EN 60332-1-2
CPR Class (CE) : Class Eca

 

Electrical characteristics

Resistance of the conductor @ 20°C : ≤ 90 Ω/km
Mutual Capacitance : 52 pF/m (cond/cond)
Capacitance unbalance : 1500 pF/km (p/p @ 1KHz)
Average characteristic impedance : 100 ± 15 Ω @ 100MHz
Velocity of propagation (NVP) : 66%

Frequency (MHz) : 1 4 10 16 20 31,5 62,5 100 155 200 250
Attenuation (dB/100m) 2.0 3.8 6.0 7.6 8.5 10.8 15.5 19.9 24.70 29.1 33
NEXT (dB) 74.3 65.3 59.3 56.2 54.8 51.9 47.4 44.3 41.7 39.8 38.3
PS-NEXT (dB) 72.3 63.3 57.3 54.2 52.8 49.9 45.4 42.3 39.7 37.8 36.3
ELFEXT (dB) 67.8 55.8 47.8 45.9 41.8 42.0 42.0 27.8 24.3 21.8 20.4
PS-ELFEXT (dB) 64.8 52.8 44.8 43.0 38.8 35.0 29.1 25.0 21.3 19.0 17.0
Return Loss 20 23.0 25.0 25.0 25.0 21.5 21.5 20.1 18.9 18.0 17.3

Ordering and delivery information

Pair count P/N O.D [mm] Weight [kg/km] Packaging
4 pairs W5UX042W0S30 6.5 36.8 305m / 1000ft box

 

Recommended connectivity

Keystone jack : MJ6UK / MJ6UC
RJ45 plug : RJ45U6PL241 / RJ45U6BL241
Panel : PPE24SU
Patchcords : PCMJ6U_


SCS6U Cat.6 Patchcords Unscreened U/UTP 4 pairs PVC

Standards of reference and applications

ISO 11801, EN 50173 & TIA/EIA 568
100BASE-TX Fast Ethernet, 1000BASE-T Gigabit Ethernet, 155 Mbps ATM, 622 Mbps ATM, Video, Token Ring.

 

Product Features

Category 6 Compliant
Backward Compatible
Independently verified
Choice of Colours
T568B wiring
Blade style ‘slimline’ moulded strain relief boot with clip protector
Individually bagged

 

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -10 to +60 °C
Durability : > 700 Cycles (in/out)

 

Design

Cable conductor : stranded bare copper AWG24
Cable insulation : polyethylene
Cable outer jacket : PVC material, nominal diameter 6.10mm
Cable marking : APS Finland – Category 6 U/UTP 4 pairs 24AWG Patch Cable  – 100Ohm — ISO/IEC 11801 TIA/EIA-568C.2-1 UL LISTED – m
Type of connector (end A) : Plug RJ45 8(8)

Type of connector (end B) : Plug RJ45 8(8)
Type of boot (end A) : moulded
Type of boot (end B) : moulded

Environmental properties and Fire Performances

Flame retardant :  IEC60332-1

 

Electrical characteristics

Dielectric strength : 2500V for 3 seconds
Contact resistance :
 max 250Ω
Typical resistance unbalance : 2%
Insulation Resistance : min. 150 MΩ/km

 

Ordering and delivery information

P/N Packaging
PCMJ6Uxxc 1 pc/box

xx = meter length (ex. 0,5m = 05; 1m = 1; 2m = 2; 10m = 10; …)
c = colours = Red (RD), Blue (BU), Black (BK), Green (GN), Yellow(YW), White (WT), Violet (VT), Orange (OR), Pink (PK).

 

Recommended connectivity

Horizontal cable : W5UX042W, W5UX042M, W5UX042E
Keystone jack :
MJ6UK / MJ6UC
Panel : PPE24SU

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCS6U Keystone jack, U/UTP unscreened, Category 6, Tool-less

Standards of reference and applications

Standards :  IEC60603-7-5, ISO/IEC 11801, IL/cUL Safety Standards, EIA/TIA 568b.2-1, EN 50173
Applications :  1000BASE‐T Gigabit Ethernet , 100BASE‐TX Fast Ethernet, 10 Base‐T Ethernet, 622Mbps ATM , 155Mbps ATM

 

Features

Standard RJ45 footprint
Fast, easy, reliable termination
Clear IDC termination colour coding
Suitable for foil and braided screen cables
Available as black&white colour
25 Years System Warranty
Wiring Specifications T568A & T568B

 

Installation Features

Store at  -40 to +70 °C
Install at  -0 to +50 °C
Operate at : -20 to +60 °C
Fitting : keystone jack

 

Design

Dimensions :  14.5 x 41.2 x 26.8 mm
Material :  Fire retardant polymer
Holder and IDC block :  PC resin, UL94 V-O
Coating :  1.27 μm gold
PBC :  FR4
Shield :  NO
Conductor :  26-22 AWG
Connector type :  RJ45 8(8)
Connection type :  
insulation displacement
Round cable outer diameter :  5.0 – 8.0 mm
Flat cable outer diameter :  NO
Tool :  no tool
Cable tie :  1 pc
Pack :  24pc/bag – 504pcs/box

 

Ordering and delivery information

P/N Packaging
MJ6UK 24 pcs/box

 

Recommended connectivity

Patch panel : PPE24SU
Patchcords : PCMJ6U_
Faceplates : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 


SCS6U Keystone jack, U/UTP unscreened, Category 6, Tool-less, 180 degrees

Standards of reference and applications

Standards :  IEC60603-7-5, ISO/IEC 11801, IL/cUL Safety Standards, EIA/TIA 568b.2-1, EN 50173
Applications :  1000BASE‐T Gigabit Ethernet , 100BASE‐TX Fast Ethernet, 10 Base‐T Ethernet, 622Mbps ATM , 155Mbps ATM

 

Features

Standard RJ45 footprint
Fast, easy, reliable termination
Clear IDC termination colour coding
Suitable for unscreened cables
Available as multiple colours
25 Years System Warranty
Wiring Specifications T568A & T568B

 

Installation Features

Store at  -40 to +60 °C
Install at  -0 to +50 °C
Operate at : -40 to +60 °C
Fitting : keystone jack

 

Design

Dimensions :  17.59 x 32.16 x 26.94mm
Housing :  High-impact Flame Retardant Polycarbonate,UL94V-0
Spring Wire :  Phosphor Bronze With Gold-plated 3u-50u
IDC Contact :  Phosphor Bronze 
Insertion life :  ≥1000 mating cycles 
IDC Accept :  22-26 AWG
Wire Scheme :  T568A/B 
Insulation Resistance :  500Ω
Current Rating :  1.5Amps
DC Resistance :  0.1 ohm MAX
Voltage : 150 VAC MAX
Plug Retention Force :  89N 
Pack :  24pc/bag – 504pcs/box
Round cable outer diameter :  5.0 – 8.0 mm
Flat cable outer diameter :  NO
Tool :  no tool
Cable tie :  1 pc

Pack :  24pc/bag – 504pcs/box

 

 

 

 

 

 

Ordering and delivery information

Colour P/N Packaging
White MJ6UKF17 24 pcs/box
Blue MJ6UKF17U 24 pcs/box
Red MJ6UKF17R 24 pcs/box
Green MJ6UKF17G 24 pcs/box
Black MJ6UKF17K 24 pcs/box
Orange MJ6UKF17O 24 pcs/box

 

Recommended connectivity

Patch panel : PPE24SU
Patchcords : PCMJ6U_
Faceplates : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

 

 

 
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 


SCS6U Keystone jack, U/UTP unscreened, Category 6, Tool-type

Standards of reference and applications

Standards :  IEC60603-7-5, ISO/IEC 11801, IL/cUL Safety Standards, EIA/TIA 568b.2-1, EN 50173
Applications :  1000BASE‐T Gigabit Ethernet , 100BASE‐TX Fast Ethernet, 10 Base‐T Ethernet, 622Mbps ATM , 155Mbps ATM

 

Features

Standard RJ45 footprint
Fast, easy, reliable termination
Clear IDC termination colour coding
Suitable for foil and braided screen cables
Available as black&white colour
25 Years System Warranty
Wiring Specifications T568A & T568B

 

Installation Features

Store at  -40 to +70 °C
Install at  -0 to +50 °C
Operate at : -20 to +60 °C
Fitting : keystone jack

 

Design

Dimensions :  14.5 x 42.0 x 26.8 mm
Material :  Fire retardant polymer
Holder and IDC block :  PC resin, UL94 V-O
Coating :  1.27 μm gold
PBC :  FR4
Shield :  NO
Conductor :  26-22 AWG
Connector type :  RJ45 8(8)
Connection type :  
insulation displacement
Round cable outer diameter :  5.0 – 8.0 mm
Flat cable outer diameter :  NO
Tool :  punch down tool
Cable tie :  1 pc
Pack :  24pc/bag – 504pcs/box

 

Ordering and delivery information

P/N Packaging
MJ6UK 24 pcs/box

 

Recommended connectivity

Patch panel : PPE24SU
Patchcords : PCMJ6U_
Faceplates : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 


SCSACC Single Gang Unloaded Face Plate with 2 x Keystone Jacks

Standards of reference and applications

 

Product Features

Flush mount
2 unloaded ports
Designed for Keystone Jacks

 

Installation Features

Store at  -0 to +60 °C
Install at  -0 to +50 °C
Operate at : -10 to +65 °C

 

Design

Material :
Colour  :  white
Height :  86mm
Width :  86mm
Type of fastening :  Screw
Outlet direction :  Straight
Shielded jacks:  yes
Shielded housing :  no
Surface mounted :  yes
Flush mounted (plaster) :  yes
With label space :  yes
Coloured ID :  yes


Ordering and delivery information

P/N Packaging
FP86171S245 1 pc/bag

 

Recommended connectivity

Keystone jack, unscreened : MJ6UK, MJ6UKTC
Keystone jack, unscreened :
KJ6ASTPNH,  KJ6ASTPNY

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCSACC Single Gang Unloaded Face Plate with 2 x Keystone Jacks

Standards of reference and applications

 

Product Features

Flush mount
2 unloaded ports
Designed for Keystone Jacks

 

Installation Features

Store at  -0 to +60 °C
Install at  -0 to +50 °C
Operate at : -10 to +65 °C

 

Design

Material :
Colour  :  white
Height :  86mm
Width :  86mm
Type of fastening :  Screw
Outlet direction :  Straight
Shielded jacks:  yes
Shielded housing :  no
Surface mounted :  yes
Flush mounted (plaster) :  yes
With label space :  yes
Coloured ID :  no


Ordering and delivery information

P/N Packaging
FP86150S245 1 pc/bag

 

Recommended connectivity

Keystone jack, unscreened : MJ6UK, MJ6UKTC
Keystone jack, unscreened :
KJ6ASTPNH,  KJ6ASTPNY

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.
AP Solutions Oy – www.aps-finland.fi – info@apsolutions.fi