BOA1 fiber optic cable breakout armoured SHF1

Store at: -40 to +70 °C
Install at: -10 to +50 °C
Bend minimum: 15 times O.D.
Operate at: -40 to +70 °C
Bend minimum:10 times O.D.
Crush maximum: 2000N/100mm
Impact maximum: 20J

Design

Bare fiber : 250µm
Buffer : 900µm tight buffer
Colour code : white
Protection : aramide yarns
Inner sheath : blue SHF1 material, nominal diameter 2.0mm, each numbered for identification
Cable core : up to 24 tight buffered fibers are stranded together around a central member and wrapped by a synthetic tape.
Intermediate jacket : blue SHF1 UV-Resistant material, nominal thickness 1.0mm
Armour : galvanized steel wire braid, coverage ≥85% (tinned copper or bronze braid available upon request)
Outer jacket : blue SHF1 UV-Resistant material, nominal thickness 1.2mm
Marking : APS Finland ww/mm – Fiber Optic Cable BREAKOUT BOA1 “fiber count / type” – ARMOURED SHF1 IEC60332-3-22 Cat A – lot + meter

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : NO
Ozone resistant : upon request
Weather resistant : upon request
LSZH SHF2 : upon request
Oil resistant : intermittent splash – permanent resistance available upon request
MUD resistant : upon request
Water absorption : upon request
Water penetration : upon request
UV resistant : IEC60811-2-1, ASTM-D-2565-92A

Marine:

Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables

Onshore:

Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables
High temperature cables

Offshore:

Communication cables
Instrumentation Cables
Composite cables
Fire Resistant cables
Deck and High-Lift Cables
Underwater cables
Arctic grade cables