BO1 fiber optic cable breakout SHF1

Store at: -40 to +70 °C
Install at: -10 to +50 °C
Bend minimum: 15 times O.D.
Operate at: -40 to +70 °C
Bend minimum:10 times O.D.
Crush maximum: 1000N/100mm
Impact maximum: 10J


Bare fiber : 250µm
Buffer : 900µm tight buffer
Colour code : white
Protection : aramide yarns
Inner sheath : blue SHF1 material, nominal diameter 2.0mm, each numbered for identification
Cable core : up to 24 tight buffered fibers are stranded together around a central member and wrapped by a synthetic tape.
Outer jacket : blue SHF1 UV-Resistant material, nominal thickness 1.2mm
Marking : APS Finland ww/mm – BO1 Fiber Optic Cable BREAKOUT “fiber count and type” – SHF1 IEC60332-3-22 Cat A – lot + meter

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : NO
Ozone resistant : upon request
Weather resistant : upon request
LSZH SHF2 : upon request
Oil resistant : intermittent splash – permanent resistance available upon request
MUD resistant : upon request
Water absorption : upon request
Water penetration : upon request
UV resistant : IEC60811-2-1, ASTM-D-2565-92A


Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables


Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables
High temperature cables


Communication cables
Instrumentation Cables
Composite cables
Fire Resistant cables
Deck and High-Lift Cables
Underwater cables
Arctic grade cables