Cat.6A S/FTP 4 pairs solid conductor AWG23/1 SHF1

Store at 0 to : +70 °C
Install at : -10 to +50 °C
Bend minimum : 8 times O.D.
Operate at : -30 to +80 °C
Bend minimum : 4 times O.D.
Pull maximum : 100N

Design

Conductor : solid bare copper 0.575mm
Insulation : Cellular polyolefin Ø1.5mm
Pair : 2 insulated conductors stranded together into a pair
Colour code : 1.White/blue 2.White/orange 3. White/green 4.White/brown (IEC 708-1)
Screen 1 : Aluminium/polyester or Aluminium/polyester/aluminium tape over each single pair
Screen 2 : tinned copper wire braid
Outer jacket : Grey Fire Retardant and UV Resistant SHF1 material, LSZH (nominal Ø 8.3mm)
Marking : APS Finland – Cat 6A LAN cable S/FTP SHF1 Unarmoured Class 1 solid conductor – DNV GL TA PROGRAMME NO.
6-827.50-2 CATEGORY – IEC 61156-5 – EN 50288-1 – IEC 60332-3-24 – Batch no.- Meter marking

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : NO
Ozone resistant : upon request
Weather resistant : upon request
LSZH SHF2 : upon request
Oil resistant : intermittent splash – permanent resistance available upon request
MUD resistant : upon request
Water absorption : upon request
Water penetration : NO
UV resistant : IEC60811-2-1, ASTM-D-2565-92A

Marine:

Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables

Onshore:

Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables
High temperature cables

Offshore:

Communication cables
Instrumentation Cables
Composite cables
Fire Resistant cables
Deck and High-Lift Cables
Underwater cables
Arctic grade cables