CCTV cable 75Ohm coax 1xRG11 2P 3C SHF1 Fire Resistant

Store at : -40 to +70 °C
Install at : -10 to +50 °C
Bend minimum : 20 times O.D.
Operate at : -40 to +80 °C
Bend minimum : 20 times O.D

Design

Coaxial 75Ohm RG11

Inner conductor : stranded tinned copper 7×0.40mm
Dielectric : PE + Silicone Ø 7.25 ± 0.18 mm
Braid : bare copper, coverage 97%
Sheath : non-corrosive thermoplastic compound, Low Smoke Zero Halogen Ø 10.3 ± 0.20 mm
Velocity : 67%
Capacitance : 67 pF/m
Resistance conductor : 20.5 Ω/km R
Resistance braid : 4.4 Ω/km
Attenuation @ 1000MHz : 23.4 dB/100m
Attenuation @ 3000MHz : 50.1 dB/100m
Return Loss @ 900MHz : > 20.0 dB
Screening effectiveness : > 20.0 dB

Signal, 2 pairs AWG22

Conductor : stranded tinned copper AWG22/7 (0.88mm2)
Insulation :fire resistant tape + XLPE nominal Ø 2.75
Assembling : no 2 insulated conductors colour coded (1.White, 2.Black) stranded together into a pair.
Screen : aluminium/polyester tape 100% coverage with tinned copper drain wire
Sheath : non-corrosive thermoplastic compound, LSZH, nom. Ø 4.3mm, colour coded (1.Black 2.Blue)
Resistance of conductor @ 20°C :≤ 90 Ω/km
Insulation resistance @ 20°C : ≥ 1000 MΩ x km
Test Voltage :  1000 V DC x 1 minute

Power, 3 cores 2.5mm2

Conductor : stranded tinned copper 2.5mm2
Insulation : fire resistant tape + cross linked polyethylene nominal Ø 3.3mm, colour coded (1.Black, 2.Red, 3.Green/Yellow)
Conductor resistance @ 20°C : ≤ 7.98 Ω/km
Insulation resistance @ 20°C : ≥ 5000 MΩ x km
Test Voltage : 2000 V AC x 1 minute

Assembling

Cable core : coaxial, signal and power elements stranded together into a compact core, with fillers and wrapping
Inner jacket (outer for unarmoured version) : SHF1 thermoplastic compound, black colour (other colours upon request)
Marking : APS Finland – ww/yy – COMPOSITE CABLE OCX75112P223251 – SHF1 IEC60331-23 IEC60332-3-24 – lot + m
Armoured version

Armour : galvanized steel wire braid, coverage ≥80% (alternatives : Bronze braid, Stainless steel braid)
Outer jacket : SHF1 thermoplastic compound, black colour (other colours upon request)
Marking : APS Finland – ww/yy – ARMOURED COMPOSITE CABLE “PN” – SHF1 IEC60331-23 IEC60332-3-24 – lot + m

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C
Fire resistant : IEC 60331-23
Ozone resistant : upon request
Weather resistant : upon request
LSZH SHF2 : upon request
Oil resistant : intermittent splash – permanent resistance available upon request
MUD resistant : upon request
Water absorption : upon request
Water penetration : NO
UV resistant : IEC60811-2-1, ASTM-D-2565-92A

Marine:

Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables

Onshore:

Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables
High temperature cables

Offshore:

Communication cables
Instrumentation Cables
Composite cables
Fire Resistant cables
Deck and High-Lift Cables
Underwater cables
Arctic grade cables