CCTV and Telecom cable 4 optical fibers, 3 Power cores, SHF1

 

Store at : -40 to +80 °C
Install at : -10 to +50 °C
Bend minimum : 15 times O.D.
Operate at : -40 to +80 °C
Bend minimum : 12 times O.D.
Pull maximum : 1000N
Crush maximum : 200N/100mm

Design

Coaxial, 75Ohm RG11

Inner conductor : stranded tinned copper 7×0.40mm
Dielectric : polyethylene Ø 5.25 ± 0.18 mm
Braid : bare copper, coverage 97%
Wrapping : non-migrating polyester tape
Sheath : non-corrosive thermoplastic compound, Low Smoke Zero Halogen Ø 10.3 ± 0.20 mm
Velocity : 67%
Attenuation : @ 1000MHz 23.4 dB/100m
Capacitance : 67 pF/m
Attenuation : @ 3000MHz 50.1 dB/100m
Resistance conductor : 20.5 Ω/km
Return Loss : @ 3000MHz > 20.0 dB
Resistance braid : 4.4 Ω/km
Screening effectiveness : > 20.0 dB

Fiber optic 4 Cores

Fiber : Fiber: 125/250µm SM or MM (see Fiber Characteristics datasheets)
Buffer : PBTP tube nominal diam 1.8mm filled with jelly (alternatively tight buffer design)
Colour code : 1.Natural 2.Red 3.Green 4.Yellow
Protection : Glass yarns (alternatively aramide yarns)
Jacket : LSZH Orange, nominal thickness 0.7mm, nominal outer Ø 3.5mm

Power, 3 cores 2.5mm2

Conductor : stranded tinned copper 2.5mm2 (According to Class 5 IEC 60228, Ø of strands 0.25mm)
Insulation : cross linked polyethylene (XLPE) nominal Ø 3.5mm, colour coded (1.Brown, 2.Blue, 3.Green/Yellow)
Conductor resistance @ 20°C : ≤ 8.21 Ω/km
Insulation resistance @ 20°C : ≥ ≥ 1GΩ x km
Operating Voltage : 600/1000V
Test Voltage : 3500 V AC x 1 minute

Assembling

Cable core : power and fiber elements stranded together around a central filler and wrapped by synthetic tape
Inner jacket (outer for armoured version) : non-corrosive thermoplastic compound, LSZH, nom. Ø 11.0mm, black colour
Marking (non-armoured version) : APS Finland – ww/yy – COMPOSITE CABLE OC3254_H – LSZH IEC60332-3-22 Cat.A
Armour : galvanized steel wire armour, coverage ≥85%
Outer jacket : non-corrosive thermoplastic compound LSZH, nom. Ø 15.0mm, black colour
Marking : APS Finland – ww/yy – ARMOURED COMPOSITE CABLE OC3254__HFH – LSZH IEC60332-3-22 Cat.A – lot + m

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : upon request
Ozone resistant : upon request
Weather resistant : upon request
LSZH SHF2 : upon request
Oil resistant : intermittent splash – permanent resistance available upon request
MUD resistant : upon request
Water absorption : upon request
Water penetration : IEC 60794-1-2-F5-B (fiber unit), upon request for the whole inner core.
UV resistant : IEC60811-2-1, ASTM-D-2565-92A

Marine:

Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables

Onshore:

Communication cables
Instrumentation cables
Composite cables
Fire Resistant cables
High temperature cables

Offshore:

Communication cables
Instrumentation Cables
Composite cables
Fire Resistant cables
Deck and High-Lift Cables
Underwater cables
Arctic grade cables